Contact Us

L-Series Desiccant Breathers

L-Series Breathers are available with 100% silica gel or activated carbon, or a combination of both, as necessary. These breathers include an in-line filter/dryers that remove water vapor and solid contaminants from air exhaust lines, low pressure compressed air lines, vacuum lines, and other in-line airflow applications where clean, dry air is required. Air enters the filter/dryer in one end and is clean and dry when leaving the other end. Water vapor and solid particles down to 2 micron are removed. L-Series is rated up to 60 psi and mounted on the regulated side of the air line.

Applications - Air Exhaust Lines • Vacuum Lines • Low Pressure Compressed Air Lines • Marine Vehicles

specifications

bucket
  • Product L-Series Desiccant Breathers
  • Base material 100% Silica Gel
Model Height Diameter Both Ends Connection Silica Gel Maximum Adsorptions Capacity Maximum Air Flow Maximum Reservoir Fluid Flow Type of Medium
L-141 5.5 in 14.0 mm 2 in 5.1 mm 1/2" FNPT 0.2 lbs 0.1 kg 1.35 fl oz 39 mL 4 cfm 30 gpm 100% Silica Gel
L-142 8.5 in 21.6 mm 2 in 5.1 mm 1/2" FNPT 0.3 lbs 0.1 kg 2.32 fl oz 68 mL 6 cfm 45 gpm 100% Silica Gel
L-143 5.5 in 14.0 mm 3.25 in 8.3 mm 1/2" FNPT 0.8 lbs 0.4 kg 4.91 fl oz 145 mL 10 cfm 75 gpm 100% Silica Gel
L-144 8.5 in 21.6 mm 3.25 in 8.3 mm 1/2" FNPT 1.2 lbs 0.5 kg 7.87 fl oz 232 mL 10 cfm 75 gpm 100% Silica Gel

* Note: Models with other media are available.


Contact us at: sales@airsentry.com